|
|
Data Acquisition:
| PCI-6208
Series |
| 8/16
Channels |
| 16-bit
Analog Output Cards |
|
 6208A
|
|
 6208V
|
|
Features
32-bit
PCI-Bus, Plug and Play
- 8 channels 16-bit voltage output for PCI-6208V
- 16 channels 16-bit voltage output for
PCI-6216V
- 8 channels voltage and current output for
PCI-6208A
- Bipolar voltage output range ?10 V, 14-bit
accuracy guarantee
- Differential
±0.01%
of FSR typical
- Fast 2
±sec
settling time from -10V~+12V
TTL
compatible 4-CH DI and 4-CH DO
- Programmable
current output range for PCI-6208A
- On
board current source
- On
board DC-to-DC converter
- Complies
with PCI local bus specification R2.1
- Easy
programming, software driver support for
DOS,Win-95, Win-NT
|
|
| Introductions |
| The
PCI-6208 Series products are analog output cards
with high resolution and high density. All these
products are based on the basic version,
PCI-6208V. These cards can be used to replace the
old ISA bus analog output cards, and can provide
better resolution as well as PCI plug and play
function. |
|
| PCI-6208V |
| The
PCI-6208V can offer 8 identical voltage outputs
channels. Each channel provides ±10V
voltage outputs and 16-bit resolution, 14-bit
accuracy is guaranteed. Therefore, this card can
cover all of the 12-bit uni-polar or bipolar
applications. The unique features of the card can
achieve high density of 8 channels and create best
performance / cost ratio. |
| PCI-6216V
/ EXP-8V |
| PCI-6216V
is a higher density voltage output card. It
combines the PCI-6208V and EXP-8V expansion board
together. The EXP-8V provides extra 8 voltage
output channels, therefore, the PCI-6216V can be
extended up to 16 channels. |
| D/A
Converter: PCM-56 |
| All
of the PCI-6208/16 analog output channels are
identical. Each one is equipped with the PCM-56
which is a state-of-the-art, fully monotonic,
digital analog converter. This device employs
ultra-stable nichrome (NiCr) thin-film resistors
to provide monotonicity, low distortion, and low
differential linearity error over long period of
time. |
| PCI-6208A
/ EXP-8A |
| The
PCI-6208A is a high perform-ance, 16-bit current
and voltage output card, combining PCI-6208V with
EXP-8A. The EXP-8A includes 8 precision voltage-to
- current converters / transmitters, which
converts PCI-6028V voltage output into current
source output. Each current output channel is pro-grammable
of 0-20mA, 4-20mA, or 5-25mA ranges. |
| Applications |
| Industrial
process control |
| Pressure/temperature
transmitters |
| Current
Source for test equipment |
| Servo
Control |
| Function
Generator |
| Communication
by current signal |
|
| Specifications
Voltage
Output (D/A)
Number
of Channels:
8
channels (PCI-6208V)
8
channels (PCI-6208A)
16
channels (PCI-6216V)
- Resolution:
16-bit
- Output
ranges: Bipolar ±10V
- Conversion
type: monolithic multiplying
- Converter:
B.B. PCM56 U or equivalent
- Settling
time: 2 us(-10V~+10V)Differential
linearity
error: ±0.015% Full Scale Range
- Voltage
output drive: ±5mA max.
- Data
transfer: programmed I/O
- Monotonicity:
15-bit typical
- Gain
error: ±2.0% (without trimming)
- Output
initial status: 0V
(after RESET or POWER-ON)
Current
Output (PCI-6208A)
Number
of channels:
8 channels Output ranges:
Programmable
0-20mA, 4-20mA, 5-25mA
- Converter:
Digital to voltage: (D/A)B.B. PCM56 or
equivalent
Voltage to current: (V/I) B.B. XTR110
for V/I converter
- Settling
time: 17 us
- Slew
rate: 1.3 mA/us
- Non-linearity:
±0.01% of span
- Span
error: initial 0.3% of span
- Output
resistance: 10 W max.
- Output
initial status: 0mA
(after RESET or POWER-ON)
General
Purpose Digital I/O
Number
of channels: 4DI/4DO
- Signal
characteristic: TTL compatible
General
Specifications
Bus:
32-bit PCI Bus
- I/O
connectors: 37-pin D-sub connector
- Operating
temperature: 0°~ 60°
- Storage
temperature: -20°~ 80°
- Humidity:
5 ~ 95%, non- condensing
|
 |
Power
consumption:
PCI-6208V
+5V@530 mA typical
+12V@90 mA typical
PCI-6216V
+5V@1 A typical
+12V@300 mA typical
PCI-6208V
+5V@600 mA typical
+12V@380 mA typical (without current
output)
- PCB
Dimensions: Compact and half-size
153 mm x 102 mm
Software
Support
PCI-6208/6216Library
&Utility
for DOS library and Windows 95 DLL,
shipped with card.
- PCIS-DASK/NT
[/98]
are the ADLink data acquisition
software
kits for Windows NT/98.
- DASYLab
is a software package for
laboratory automation.
- PCIS-LVIEW/95
[/NT] are the LabView
drivers for Win 95 or NT.
- DAQ-Bench
is a 32-bit ActiveX controls for
Windows NT/98.
Termination
Boards
*ACLD-9188
* ACLD-9137
*
DIN-37D
Order
Information
PCI-6208V
8-CH 16-bit Voltage Output Card
PCI-6216V
16-CH 16-bit Voltage Output Card
PCI-6208A
8-CH 16-bit Voltage and Current
Output Card
PCI-62oo
[C]/NN
oo=08 or 16
C=A or V
NN=37: + ACLD-9137
NN=88: + ACLD-9188 (Include 1M cable,
ACL-10137-1)
|
|
|
|
