Data Acquisition:  

PCI-7200
12 MB/s High Speed
           Digital I/O Card

pci-7200.gif (23259 bytes)

 

 

Features
  • 32-bit PCI-Bus, Plug and Play
  • 32 channels digital inputs
  • 32 channels digital outputs
  • Up to 12M Bytes per sec data transfer rate
  • Bus-mastering DMA data transfer
  • On-board internal timer pacer trigger
  • Internal timer pacer trigger is controlled by  internal timer
  • Input sampling rate and digital output rate is  controlled by internal timer
  • On-board FIFO for both digital input and output
  • ACK and REQ for handshaking data transfer
  • Multiple interrupt sources are selectable by  software
  • Compact sizeonly half-size PCB
  • DB-37 rugged connector
Introductions

 

The PCI-7200 is a high speed 32-bit digital input/output interface card that based on the 32-bit PCI bus architecture. It utilize the state-of-the-art bus-mastering DMA to achieve the high-speed data transfer The best performance/cost ratio makes this card to be ideal for any digital I/O applications.

 

Specifications

Digital I/O (DIO)

  • Number of channels: 32
  • I/O signal characteristic: TTL compatible
  • Input voltage:
    - Low: 0.V min., 0.8V max.
    - High: +2.0V min.
  • Input load:
    - Low: +0.5V @ 0.2mA max.
    - High: +2.7V @ 20mA max.
  • Output voltage:
    - Low: 0.V min., 0.4V max.
    - High: +2.4V min.
  • Output driving capacity:
    - Low: +0.5V @ 8mA max. sink
    - High: +2.7V @ 0.4mA max. source

Programmable Counter

  • Device: 8254
  • Timer 0: DI clock source
  • Timer 1: DO clock source

Pin  Assignment of The 40-pin Header  Connectors


           pci-7200pin.JPG (18710 bytes)

i-line-1.gif (89 bytes)

General  Specifications
  • Connector: one DB-37 female connector and one  40-pin header
  • Operating temperature: 0°~60°C
  • Storage temperature: -20°~ 80°C
  • Humidity:5~95%, non-condensing
  • Power consumption: +5V @ 620mA typical
  • Dimensions: 148 mm x 102 mm

Software Support

  • PCI-7200Library  &Utility for DOS library
    and Windows 95 DLL, shipped with card.
  • PCIS-DASK/NT [/98] are the ADLink data
  • acquisition software kits for
    Windows NT or 98.
  • DASYLab is a software package
    for laboratory automation.
  • PCIS-LVIEW/95 [/NT] are the LabView
    drivers for Win 95 or NT.
  • DAQ-Bench is a 32-bit  ActiveX controls
    for Windows NT/98.

Termination Boards

*ACLD-9188 * ACLD-9137

* DIN-37D

Order Information

PCI-7200
12 MB/s High  Speed 32-Ch DIO Card
(Include one 40 to 37-pin PC back panel,
ACL-10437)

 

© Copyright 2004 - Arista Corporation

 


     
WWW http://www.aristaipc.com   Google