Data Acquisition:  

PCI-9111 Series
100KHz Low Cost
Multi-functions DAS Cards

pci-9111.gif (23906 bytes)

 

 

 

Features
  • 32-bit PCI Bus, Plug and Play
  • 12-bit/16-bit analog input resolution
  • 16 single-ended channels
  • On-board A/D 1K words FIFO memory
  • Auto-scanning channel selection
  • Up to 100 KHz sampling rate
  • Programmable gain of 1,2,4,8
  • Bipolar analog input ranges
  • Three trigger mode: software trigger, timer pacer  and external trigger
  • One 12-bit multiplying DA
  • 16-bit digital input and 16-bit digital output
  • 4 extension DIO bits can be used to select  external channel multiplxer
  • Rugged DB-37 connector, compact size
  • On-board filter for signal conditioning
 
Specifications

Analog Input (A/D)

  • Converter and resolution:
    16-bit ADS7805 or equivalent for PCI-9111HR
    12-bit ADS7804 or equivalent for PCI-9111DG
  • Input channels: 16 single-ended
  • Analog signal input range: (Software programmable)
    Bipolar:
    ±10V, ±5V,±2.5V, ±1.25V, ±0.625V
  • Conversion time: 8 m sec
  • Overvoltage protection: Continuous ±35V maximum
  • Accuracy:
GAIN = 1, 2 0.01% of FSR?font SIZE="-1" FACE="Arial Narrow,Helvetica Condensed,Univers57,Zurich Cn BT"> 1 LSB
GAIN = 4, 8 0.02% of FSR ?font SIZE="-1" FACE="Arial Narrow,Helvetica Condensed,Univers57,Zurich Cn BT">1 LSB

Input impedance: 10 MWTrigger mode: Software, Timer Pacer,
and External triggerData transfer: Program control, Interrupt, FIFO-
halfData throughput: 110 KHz (maximum)FIFO size: 1024 words

Analog output (D/A)

  • Number of channel: 1 channel
  • Resolution: 12-bit
  • Output range: (jumper selectable)* Unipolar: 0~10V
    Bipolar: -10V~+10V
  • Converter: AD DAC7541 or equivalent,
    monolithic multiplying
  • Settling time: 30 m sec
  • Output driving:±5 mA max.

Digital I/O (DIO)

  • Number of channels: 16DI/16DO
  • Signal type: TTL compatible

Extended Dgital I/O (EDIO)

  • Number of channels: 4 inputs or outputs
  • Signal type: TTL compatible

Programmable Counter

  • Device: 8254
  • A/D pacer: 32-bit timer
    (two 16-bit counter cascaded together)
    with a 2 MHz time base
  • Pacer output: 0.00046 Hz ~ 0.5 MHz
  • Pre-trigger counter: One 16-bit counter
    for counting A/D conversion pulse

i-line-1.gif (89 bytes)

General Specifications
  • Connector: 37-pin D-type connector
  • Operating temperature: 0°~ 60° C
  • Storage temperature: -20°~ 80°C
  • Humidity: 5 ~ 95%, non-condensing
  • Power consumption: +5 V @ 570 mA
    typical
  • Dimensions: Compact size
    only 173 mm x 102 mm

Software Support

  • PCI-9111Library &Utility
    for DOS library and Windows 95 DLL,
    shipped with card
  • PCIS-DASK/NT [/98]
    are the  data acquisition software kits
    for Windows NT.
  • DASYLab is a software package for
    aboratory automation.
  • PCIS-LVIEW/95 [/NT]
    are the LabView drivers
    for Win 95 or NT.
  • DAQ-Bench is a 32-bit ActiveX
    controls for Windows NT/98.

Termination Boards

*ACLD-9188  * ACLD-9137 * ACLD-9138 * ACLD-8125

*ACLD-9185  *ACLD-9182 *DIN-37D

Order Information

PCI-9111DG: 100 KHz Low Cost 12-bit DAS Card

PCI-9111HR: 100 KHz Low Cost 16-bit DAS Card

PCI-9111AA/NN: AA=DG or HR
NN=37: + ACLD-9137
NN=25: +ACLD-8125(Include 1M cable,ACL-10137-1)
NN=38: + ACLD-9138 (Include 1M cable, ACL-10237-1)

 

 

 


 

© Copyright 2004 - Arista Corporation

 


     
WWW http://www.aristaipc.com   Google