| Specifications
Analog
Input (A/D)
Converter
and resolution:
16-bit ADS7805 or equivalent for
PCI-9114HR
12-bit ADS7804 or equivalent for
PCI-9114DG
- Number
of channels: 32 S.E./16D.I.
- Analog
signal input range:
(Software controlled)
- Bipolar:±10V,
±1V, ±0.1V, ±0.01V
- Conversion
time: 8 m sec
- Data
throughput: 110 KHz (maximum)
- Overvoltage
protection:
Continuous ±35V maximum
- Accuracy:
| GAIN=
1, 10 |
0.01%
of FSR±1
LSB |
| GAIN=
100,1000 |
0.02%
of FSR±1
LSB |
Input
impedance: 10
MW
Trigger
mode: Software, Timer Pacer,
and External trigger
- Data
transfer: Program control, Interrupt
- FIFO
size: 1024 words
Isolation
Digital I/O
Number
of input channels: 16 DI
- Number
of output channels: 16 DO
- Input
voltage: 0-24Vdc
Logic H: 3~24V
Logic L: 0~1.5V
Input
resistance: 1.2KW
@ 0.5W
- Output
type: Darlingtoin Transistors,
open emitor with external power supply
- Driving
capability: current source 350mA/ch
typical, 500mA/ch max.
- Isolated
voltage: 5000 Vrms
Programmable
Counter
- Device:
8254
- A/D
pacer: 32-bit timer
(two 16-bit counter cascaded together)
with a 2 MHz time base
- Pacer
output: 0.00046 Hz~0.5 MHz
|
 |
General
Specifications
Connector:
37-pin D-type connector
Operating
temperature:
0°
~ 60°
C
Storage
temperature: -20°
~ 80°
C
Humidity:
5~95%, non-condensing
- Power
consumption: +5 V @ 600 mA typical
Dimensions:
Compact size
only 200 mm x
140 mm
Software Support
PCI-9114 Library &Utility
for DOS library and Windows 95 DLL,
shipped with card.
PCIS-DASK/NT [/98]
are the data acquisition software
kits
for Windows NT/98.
DASYLab is a software package
for laboratory automation.
PCIS-LVIEW/95[/NT]are the
LabView drivers
for Win 95 or NT
DAQ-Benchis a 32-bit ActiveX
controls for Windows NT/98.
Termination Boards
*ACLD-9188 * ACLD-9137
*DIN-37D
Order Information
PCI-9114HG :32 CH, 16-bit, High
Gain DAS Card
PCI-9114DG : 32 C9H, 16-bit,
Normal Gain DAS Card
|
