|
|
Data Acquisition:
| PCI-9118
Series |
| 333K/s
High Speed |
| Multi-functions
DAS Cards |
|
|
|
Introductions:
|
|
Features
- 32-bit
PCI bus, plug & play
- 12-bit
or 16-bit analog input resolution
- Up
to 330KHz A/D sampling rate
- 16
single-ended or 8 differential analog input
channels
- Bipolar
or unipolar input signals
- Programmable
gain selection:
X 1,2,4,8 (for 9118 DG/HR)
X 1,10,100,1000 (for 9118 HG)
- On-chip
sample & hold
- Two
12-bit high speed analog output channels
- 4
digital input/output channels
- Three
A/D trigger sources: software trigger,
programmable pacer trigger, and external pulse
trigger
- 50-pin
SCSI-II connector
- Compact
size: half size PCB
|
|
| The
PCI-9118 Series is a family of high performance
data acquisition boards for PCI bus. All member of
this family share a common architecture and core
features. It is ideal DAQ card for high speed,
gap-free data acquisition applications. The
following unique features make the PCI-9118
suitable for high performance application. |
|
Channel/Gain
Queue high speed scanning
|
| A
256 location channel/gain queue on the PCI-9118
family allows high speed data acquisition with
channel at different gain and in non-sequential
order using bus-mastering DMA and FIFO interrupt
based data transfer.
|
| Gap-free/high
performance in Windows Applications |
| The
on-board 1024 locations of FIFO ensures the
high-speed data acquisition can be maintained
reliably under Windows O.S. The data can be
transferred through bus-mastering DMA and meet
gap-free, high throughput of continuous, even for
large amount of data. |
|
| |
PCI-9118DG
|
PCI-9118HG
|
PCI-9118HR
|
|
Analog
Inputs
|
16
single-ended or 8 differential
|
16
single-ended or 8 differential
|
16
single-ended or 8 differential
|
|
Maximum
Throughput
|
330K
Samples /s
|
330K
Samples /s
|
100K
Samples /s
|
|
Resolution
|
12-bit
|
12-bit
|
16-bit
|
|
Gain/Channel
Queue
|
256
|
256
|
256
|
|
Input
Range(Bipolar)
|
±nbsp;
10V, ±5V,±2.5V, ±1.25V
|
±nbsp;
10V, ±1V, ±100mV, ±10mV
|
±nbsp;
10V, ±5V, ±2.5V, ±1.25V
|
|
Input
Range(Unipolar)
|
0~10V,
0~5V, 0~2.5V, 0~1.25V
|
0~10V,
0~1V, 0~0.1V, 0~10mV
|
0~10V,
0~5V, 0~2.5V, 0~1.25V
|
|
D/A
Channel
|
2CH,
12-bit
|
2CH,
12-bit
|
2
CH, 12-bit
|
|
Digital
Input
|
4
|
4
|
4
|
|
Digital
Output
|
4
|
4
|
4
|
|
Comment
|
Normal
Gain
|
High
Gain
|
High
Resolution
|
|
| Specifications
Analog
Input (A/D)
- Converter
and resolution:
12-bit ADS7800 or equivalent
(for PCI-9118DG/HG)
16-bit ADS7805 or equivalent
(for PCI-9118HR)
- Input
channels: 16 single-ended
or 8 differential
- Analog
input range: (Software programmable)
PCI-9118DG/HR
Bipolar:
±10V,±5V,
±2.5V,
±1.25V
Unipolar:0~10V, 0~5V, 0~2.5V, 0~1.25V
PCI-9118HG
Bipolar:±10V,
±1V,
±100mV,
±10mv
Unipolar:0~10V, 0~1V, 0~0.1V, 0~0.01V
- Conversion
time:
3 m sec for PCI-9118DG/HG
8 m sec for PCI-9118HR
- Over-voltage
protection: Continuous ±35V
maximum
- Input
impedance: 10 MW
- Trigger
mode: Software, Pacer, and External
trigger
- Data
transfer: Program control, interrupt,
DMA
- Data
throughput:
330 KHz max. for PCI-9118DG
330 KHz max. for PCI-9118HG (single
channel by DMA data transfer)
110 KHz max. for PCI-9118HR
Analog
Output (D/A)
- Number
of channels: 2
- Resolution:
12-bit
- Output
range:
- Bipolar: -10V~10V
- Unipolar: 0V~10V
- Converter:
B.B 2813 or equivalent,
monolithic multiplying
- Settling
time:
- 4.5 m sec typical
- 6 m sec maximum
- Control
mode: Double buffered mode
or transparency mode
Data
format: 2's
complement or Binary format
- Linearity:
±1/2
bit LSB max
- Output
driving:
±5
mA min.
- Output
impedance: 0.2 Ohm
Digital
I/O (DIO)
- Number
of input channels: 4
- Input
voltage:
Low:Min. 0V; Max. 0.8V
High:Min. +2.0V
- Input
load:
Low:+0.5V@0.2mA max.
High:+2.7V@+20mA max.
- Number
of output channels: 4
- Output
voltage:
Low:Min. 0V; Max. 0.4V
High:Min. +2.4V
- Driving
capacity:
Low:Max. +0.5V at 8.0mA (Sink)
High:Min. 2.7V at 0.4mA (Source)
|
|
Programmable
Counter
- Device:
8254 or equivalent
- A/D
pacer: 32-bit timer
(two 16-bit counter cascaded together)
with a 2 MHz time base
- Pacer
frequency range: 0.00046 Hz ~ 0.5 MHz
- Counter:
One 16-bit counter with a 2 MHz time
base
General
Specifications
- Connector:
50-pin SCSI-II connector
- Operating
temperature: 0
°~
55°C
- Storage
temperature: -20
°~
80°C
- Humidity:
5 ~95%, non-condensing
- Power
consumption:
PCI-9118DG/HG
+5V
@ 450 mA typical
+12V@ 200 mA typical
-12V@ 50 mA typical
PCI-9118HR
+5V @ 485 mA typical
+12V@ 180 mA typical
-12V@ 50 mA typical
- Dimensions:
Compact size
only 173mm x 102mm
Software
Support
- PCI-9118Library
&Utility
for DOS library and Windows 95 DLL,
shipped with card.
- PCIS-DASK/NT
[/98]
are the data acquisition software kits
for Windows NT/98.
- DASYLab
is a software package for
laboratory automation
- PCIS-LVIEW/95[/NT]
are the LabView drivers
for Win 95 or NT.
- DAQ-Bench
is a 32-bit ActiveX
controls for Windows NT/98.
Termination
Boards
Order
Information
PCI-9118HG:
333K/s
High Gain Multi-functions DAS Card
PCI-9118DG:
333K/s High Speed Multi-functions DAS Card
PCI-9118HR
:
333K/s High Resolution Multi-functions DAS
Card
PCI-9118HG/D:
PCI-9118HG + DIN-50S
(include 1M cable ACL-10250)
PCI-9118DG/D:
PCI-9118DG + DIN-50S
(include 1M cable ACL-10250)
PCI-9118HR/D:
PCI-9118HR + DIN-50S
(include 1M cable ACL-10250)
|
|
|
|
