Processor Socket 478 supports Intel® Pentium® 4 series processors:
Intel® Celeron® based on 0.13µcore, 400MHz FSB, up to 2.80GHz
Intel® Pentium® 4 based on 0.13µcore, 512KB L2, 533MHz FSB, without HT Technology, up to 2.80 GHz
Intel® Pentium® 4 based on 0.13µcore, 512KB L2, 533MHz FSB, with HT Technology, up to 3.06 GHz
Intel® Pentium® 4 based on 0.13µcore, 512KB L2, 800MHz FSB, with HT Technology, up to 3.20 GHz
Intel® Pentium® 4 based on 90nm core, 1MB L2, 533MHz FSB, with HT Technology, up to 2.80 GHz
Intel® Pentium® 4 based on 90nm core, 1MB L2, 800MHz FSB, with HT Technology, up to 3.4 GHz
System Memory:
Four DDR DIMM Sockets support DDR 266/333/400 unregistered non-ECC Memory up to 4.0 GB.
Dual Channel Turbo mode is automatic detected by BIOS and supported when identical DIMM module are populated on both channels.
Video Controller:
865G Integrated Intel Extreme Graphic Engine with 266MHz Core Frequency.
VGA/UMA shares System Memory as frame buffer. Buffer Size can be configured through BIOS setup.
High Performance and High Quality 3D graphic rendering Engine.
Video DVD and PC-VCR support.
One 15-pins D-type connector on bracket for CRT display.
PIDE and SATA:
Two Enhanced PIDE interfaces for up to four devices support
PIO Mode 3/4 or Ultra ATA33/66 /100 IDE Hard Disk, ATAPI CD-ROM and LS-120 drive.
Two SATA connectors support up to two SATA-150 HDDs.
Two SATA ports can be configured as RAID-0 and RAID-1 with RAID BIOS and Intel IAA drivers.
SATA RAID BIOS is integrated in System BIOS.
FDD Interface:
Support up to two floppy drives (360KB, 720KB, 1.2MB, 1.44MB, 2.88MB)
Super I/O:
Parallel Port : One high-speed parallel port with SPP/EPP/ECP mode support.
Serial Port : Four16550 UART compatible ports. COM2 and COM4 can be configured as RS232 as well as RS422/RS485 interface.
IrDA Interface: Pin-header connector for the optional IrDA external connector
Gigabit and 10/100M Ethernet:
Intel 82547GI and 8254 1GI Ethernet controller on-boards.
Two LED to display the Speed, Link and Activity.
LINK/ACT Î GREEN ON: Link
BLINKING: Activity.
SPEED Î ORANGE: 1000M bps GREEN: 100M bps OFF: 10M bps
Support Teaming, load balancing and fault-tolerance with Intel Bay-City 3.0 drivers.
Support Wake-on-LAN while ATX power supply is attached.
CMOS:
On-board RTC with 242 bytes of Battery-back CMOS RAM.
One 3-pins Jumper to clear CMOS data.
Audio:
RealTek ALC655 AC97 Audio chip on-board.
One 3-in-1 stack-up phone jacks on rear for Line-IN, Line-OUT and MIC cabling.
One CD-ROM Audio-In and One AUX-In 4-pins connector on-board.
One SUR_CEN connector for Surround and Center Speakers.
One SPDIF connector for SPDIF input and output connection.
BIOS:
Phoenix-Award Standard PnP BIOS 6.2.
4Mbit FlashROM with BootBlock for Fail-safe.
Enhanced ACPI and DMI2.0 compliant.
BIOS utility for field update.
VBIOS and LAN remote Boot Agent integrated.
32-pins PLCC type socket for easy field replacement.
ISA and PCI Expansion Slot:
Five 5V 32-bits PCI slots.
One AGP PRO 8X slots
Two ISA 16-bits slots.
Power Connector:
One ATX12V 2x2 connector on-board to support CPU Vcore power.
One ATX 20pins connector on-board to support system power.
Cooling:
One CPU cooling FAN connector near by CPU socket.
One Power colling FAN connector near by ATX PSU .
Two System cooling FAN connectors on the Front.
USB Interface:
Eight USB ports compliant with USB Specification Rev. 2.0 and support USB Hot-Plug function.
Four ports on rear penal with type-A connector for external USB devices.
Four ports in two 2x5 box header for internal USB devices connection.
Support Legacy USB devices and Boot from USB devices like USB-HDD, USB-Floppy and USB-CDROM.
USB Keyboards and Mouse are supported and can be enabled by BIOS setup.
Hardware Monitor System:
PC Health Monitoring ASIC supports system power voltages, FAN speed and system temperatures monitoring.
Keyboard and Mouse connectors:
Dual Mini-DIN connectors on rear panel for PS2 type keyboard and mouse connection.
All USB ports support USB type keyboard and mouse.
Digital Input and Output::
Support 8-bits Digital I/O.
Software programmable to configure as 4-IN/4-OUT or 8-IN or 8-OUT.
All DIO bits are 5V-tolerance.
Environmental and Mechanical:
Power Supply: 9A@+5v typical; 12A@ +12v typical; 100mA@ -12V typical; 2A@ +5VSTB
Temperature: 0C to 60C operating; -40C to 70C storage
Humidity: 5% to 95%
Dimensions: 9.6”(L) x 12” (W); or 244mm (L) x 305mm(W) |
ATX-865G:
Socket 478 Pentium 4 processor with 400/533/800MHz
FSB