 |
 Embedded
Intel Pentium M 1.1GHz CPU |
Support
Motion Compensation for MPEG2 |
| DDR
SODIMM x 1, up to 1GB |
10/100
Ethernet RTL 8100BL |
| Support
24 bit Dual Channel LVDS TFT Panel |
Support
Board ID# |
 |
Form
Factor:
* ETX form factor (ETX module)
3.7" x 4.5"
(95mm x 114mm) |
CPU:
* Intel Pentium M Micor-FCBGA
Package
1.1GHz
* 1MB L2 cache |
BIOS:
* Award BIOS |
Chipset:
* Intel 855GME, 400MHz FSB,
integrated
graphics |
Super
I/O:
* Winbone W83627HF |
Display
Controller:
* Intel Extreme Graphics2
Controller, LVDS Flat
panel and
CRT output
*
Up
to 64MB of dynamic Video RAM
* Support 2D/3D graphics
* Support dual display
* Improved hardware motion
compensation
for MPEG2 |
LCD
Support:
* Max CRT QXGA 2048 x 1536
* Max LCD UXGA 1600 x 1200
* 24bits Dual Channel LVDS |
Memory:
* 1GB Max. DDR SODIMM support
DDR 200/266 |
LAN
Chipset:
* Chipset: Realtek RTL 8100BL
chip
* Interface: IEEE 802.3U
compatible 10/100
Base-T
interface includes software
driver
and boot
ROM function |
|
Audio
Function:
* AC97 controller: Ver. 2.3
compliant interface
* Audio interface: Microphone
in; Line in;
Speaker out |
Multi
I/O:
* IDE Interface (on the
carrier board): Intel
82801DBM (ICH4)
built-in IDE interface
support 2 IDE
ports and up to four
devices,
Ultra DMA 100
* Serial (on the carrier
board): Two RS-232
port (COM1/2)
* Parallel (on the carrier
board): One parallel
port supports SPP/EPP/ECP
mode
* USB: Four USB ports support
Ver. 2.0
* K/B & Mouse (on the
carrier board): One
keyboard &
mouse port support
* IrDA (on the carrier board):
One IrDA port
support
* Real Time Clock: RTC
* Flash EPROM: 4MB
* Watch Dog Time: 0 ~ 255sec,
system reset or
NMI (W83627HF) |
Power
Consumption:
* Typical: 18W @ 5V
(1.1GHz LV CPU) |
Power
Requirement:
* +5V |
Operating
Temperature:
* 0°C ~ 60°C |
Storage
Temperature:
* -30°C ~ 85°C |
Operating
Humidity:
* 5% ~ 95% (non condensing) |
Board
Size:
* 95mm x 114mm (3.74" x
4.49") |
|
 |
ETX-701:
Intel
Pentium M 1.1GHz ETX Module |
