Power Supply: 

 

Compact-Economical High efficiency Convection cooled Great reliability 100% burn-in test Built-in line filter 2 years warranty MOSFET designed Wide input range UL1950 and CUL1950 approval CE marking & compliance with EN61000-3-2 Input Voltage: * 90~264VAC * 47~63Hz * 120~380VDC Inrush Current (cold): * 20A/110VAC * 40A/220VAC Operation Temperature: * 0°C ~50°C Storage Temperature: * 20°C ~50°C Short Protection: * Auto recovery Overload Protection: * Automatic Power Limited Hold-Up Time: * 16ms Power Ready Signal Model O/P Volts Adj.± % Load (current) Ripple & Noise Line REG. Load REG. Efficiency O.V.P. Trip point Min. Rated Max. RP1035D-05F V1: +5V±10% 0A 7A 7A 50mVp-p ±1% ±3% 69% Min. 5.8~7.0V RP1035D-12F V1: +12V±10% 0A 3A 3A 100mVp-p ±1% ±2% 72% Min. 14.5~17.0V RP1035D-24F V1: +24V±10% 0A 1.5A 1.5A 150mVp-p ±1% ±2% 75% Min. 27.6~30.0V Designation Description N Neutral Terminal Of AC Input (No Polarity At DC Input) L Line Terminal Of AC Input (No Polarity At DC Input) Grounding (Earth) Rdy DC Output OK Signal (10A Contact Relay) - DC Negative Output Terminal + DC Positive Output Terminal ADJ. Potentiometer For Output Voltage DC ON Green LED Indicator Derating A: Rdy Internal Connection of “T” Type Terminal Black     B: Rdy Internal Connection of “E” Type Terminal Black 1. Line regulation is measured from low line to high line at rated load. 2. Load regulation is measured from 20% to 100% of rated load at 110VAC input. 3. Ripple & Noise is measured by using a 0.1µF/630V metalized capacitor & a 47µF electrolytic capacitor parallel on the test point, at rated load and 110VAC input. 4. Efficiency is measured at rated load and 110VAC input. 5. Hold-up Time is measured at full load and 110VAC input

 

 

© Copyright 2004 - Arista Corporation